Learn how to utilize the Dremel Sanding and Grinding Guide with your Dremel Rotary tool.
We'll be using the Dremel 4000 tool, the Sanding & Grinding Guide Model A576 and a quarter inch sanding band #407. Whether you're looking for an even 90 degree edge or a consistent 45 degree bevel the Sanding & Grinding Guide is a great attachment for ensuring a consistently and smoothly sanded edge. This project can also be completed using any Dremel variable two-speed rotary tool that works with all standard attachments.
When using the Sanding & Grinding guide, always secure either your workpiece or the tool and guide. The Dremel Multi-Vise is great for this. When cleaning up an edge that is perpendicular to the surface of your workpiece keep the top of the guide flush onto the work pieces surface. Keep your movements slow and steady while going over your piece. Repeat the process until your satisfied with the edge's smoothness. The Sanding & Grinding Guide can be used for both flat and beveled edges. For a 45 degree bevel, rest the face of the Sanding & Grinding Guide stamped with the Dremel logo on the surface of your workpiece. Here are some additional thoughts on edge sanding. Sanding bands are available in quarter inch and half inch sizes and are available in three grits: 60, 120, and 240. The platform's orientation to the tool can be flipped. The guide can also be adjusted from 0 to 3 quarters of an inch depending on desired depth.
Visit our website and learn more about Dremel Rotary Tools:
http://goo.gl/tOdakJ
To learn more about the attachment A576 Sanding/Grinding Guide, visit:
http://goo.gl/fwGGBI
Sanding and Grinding Guide dremel workstation | |
| 28 Likes | 28 Dislikes |
| 23,598 views views | 35.4K followers |
| How-to & Style | Upload TimePublished on 1 Oct 2009 |
Không có nhận xét nào:
Đăng nhận xét